{"id":193,"date":"2012-07-26T10:30:41","date_gmt":"2012-07-26T14:30:41","guid":{"rendered":"http:\/\/putrescence.org\/wordpress\/?p=193"},"modified":"2013-07-24T15:29:35","modified_gmt":"2013-07-24T19:29:35","slug":"on-the-road-again","status":"publish","type":"post","link":"https:\/\/wordpress.putrescence.org\/?p=193","title":{"rendered":"On the road again"},"content":{"rendered":"<p>Of the list of things to do from my last entry, I&#8217;ve completed all but one task, so I am ready for the OVR RallyCross Enduro Challenge on Saturday at National Trails Raceway in Columbus.<\/p>\n<p>The new clutch took forever to get shipped from Autozone, but once it arrived I got it installed along with the new throw out bearing that was included and the used clutch cable that I sourced from the junkyard.\u00a0 While I was waiting on the clutch, I spent some time with my rotary tool grinding on the gear selector pin and was able to get all of the &#8220;additional&#8221; metal off, so now all four Booger Bushings are solidly connected.\u00a0 I also used some CRC MAF cleaner to start the process of cleaning off some of the oil, but I think that&#8217;s going to need a degreaser with a pressure washer.<\/p>\n<p>Apparently, at the same time that bolt worked its way into the pressure plate, the connector for the coolant temp sender broke loose, so Megasquirt thought that the coolant was at about -40 degrees Fahrenheit.\u00a0 That caused the computer to try to enrich the heck out of the mixture so a new connector and some electrical tape later all is good on that front.<\/p>\n<p>For the bobble strut replacement, I&#8217;m trying an experiment.\u00a0 I went to Ace Hardware and purchased a 10&#8243; long 1\/2&#8243; eyebolt, a couple large washers, a 1\/2&#8243; nut, and a rubber stopper.\u00a0 I put a hole in the center of the stopper, pressed the stopper into the eye of the eyebolt, put the washers on either side of the eyebolt, and used a couple old nuts from the parts car as spacers.\u00a0 I bolted that up to the bobble relocation bracket attached to the K-member and then used an old sway bar end link bushing and some old washers from the parts car to bolt the top to the transmission.\u00a0 I suspect that the eyebolt is going to slide off the rubber stopper, but we&#8217;ll see what it looks like after the next event.<\/p>\n<p>For the hot-side pipe, I think the real solution is to do what the SRT-4 does and run the charge pip straight down from the turbo, under the transmission, in front of the oil pan, and then into the intercooler.\u00a0 To do that, I&#8217;ll need some more exhaust bends and a lot of measuring, and a skidplate will get a lot more important.\u00a0 For now, though, I&#8217;m just going to treat the rubber sewage reducing coupler as a consumable and keep a couple extras in the car.\u00a0 Along with welding gloves.<\/p>\n<p>All-in-all, except for the boost leak caused by a split in that coupler, I had it out last night and it&#8217;s running great.<\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Of the list of things to do from my last entry, I&#8217;ve completed all but one task, so I am ready for the OVR RallyCross Enduro Challenge on Saturday at National Trails Raceway in Columbus. The new clutch took forever&#8230;<br \/><a class=\"read-more-button\" href=\"https:\/\/wordpress.putrescence.org\/?p=193\">Read more<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[],"class_list":["post-193","post","type-post","status-publish","format-standard","hentry","category-turdbo"],"_links":{"self":[{"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=\/wp\/v2\/posts\/193","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=193"}],"version-history":[{"count":2,"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=\/wp\/v2\/posts\/193\/revisions"}],"predecessor-version":[{"id":246,"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=\/wp\/v2\/posts\/193\/revisions\/246"}],"wp:attachment":[{"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=193"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=193"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wordpress.putrescence.org\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=193"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}